GUIDE FOR N95 SLIDE FIX

2007-05-26T02:43:00.000-07:00

HOW TO FIX NOKIA N95 JERKY SLIDER:
SORRY FOR MY ENGLISH I TRY TO MY BEST ABOUT THE TRANSLATION.

FIRST OF ALL THIS PROCEDURE IS NOT VERY COMPICATED BUT YOU MUST GIVE SO MUCH ATTENTION. YOUR HANDSET CAN COUSE DAMAGE.

AND IF YOUR HANDSET HAVE A GUARANTEE THIS WORKS CAN CANCEL YOUR GUARANTEE. ( IF YOU TAKE EVERYTHINK BACK I GUESS NOBODY WILL UNDERSTAND  )

NOW WHAT WE NEED FOR:
- NOKIA N95 WITH JERKY SLIDER.
- Scissors
- Tweezers
- T5/T6 SCREW DRIVER
- TAPE ( 3M OR SCOTH WILL BE FINE )

AFTER SET ALL STUFF THAT WE NEED. NOW WE ARE STARTING.
FIRST TAKE BACK COVER AND BATTERY OFF..

AS SHOWN IN PICTURE GO RIGHT DOWN SIDE OF THE PHONE AND SLOWLY TAKE OUT THE WHOLE BACK COVER.

AS SHOWN IN PICTURE

AND TAKE ALL CAREFULLY,

NOW WE NEED TO TAKE OUR 3 SCEWS THAT SHOWN IN PICTURE AT THIS

TIME PLEASE BECAREFULL MORE, DOWN PART OF THIS SIDE HAVE A IMPORTANT AND SENSITIVE PARTS.

AFTER TAKE 3 SCREWS OUT.

WE YOU OUR TWEEZERS TO TAKE BLACK METAL PART OF SLIDER ( AS SHOWN ON PICTURE ) ( SLIDE PROBLEM COMES FROM THIS METAL PART AND THE PLASTIC PART. YOU WILL SEE AFTER TAKE IT )

NOW GIVE ATTENTION WHAT YOU WILL DO NEXT, !!!!!!

NOW HOLD YOU PHONE LIKE IN PICTURE AND GENTLY PUSH UP, DONT PUSH IT SO MUCH YOU CAN COUSE SLIDER BROKE ( OTHER PART IS ALSO SCREWED AT THIS TIME !!! )

NOW YOU WILL SEE A SMALL SPACE AT THE MIDDLE OF THE PHONE

NOW WE WILL CUT A SMALL PIECE OF TAPE ( AS SHOWN IN PICTURE ) JUST A SMALL ONE WILL ENOUGH. IF YOU USE TOO MUCH IT WILL NOT WORK EASLY.

WITH THE TWEEZERS WE PUT CUTTED TAPE IN THE PLASTIC PART, BUT IN PICTURE I HAVE MADE A MISTAKE THAT I FIX MINE YOU HAVE TO PUT TAPE TOP OF THE SCREW HOLE NOT ON THE HOLE. AND PUSH THE UPPER PART OF THE TAPE INSIDE OF THE SPACE.

THAN WE PUT THE UPPER PART OF THE PHONE AGAIN IN THE HOLE AND PUT BLACK METAL PART .

WE PUT 3 SCEWS AGAIN AND PUT BACK COVER AND NOW WE HAVE BETTER N95 SLIDER.

Free Web Counter